Rsun Power Technology Co.,Ltd
Reliable Solutions for Uninterrupted Needs
Add to Cart
Low Frequency Online UPS 60KVA Commercial Ups Systems Transformer Base UPS Remote Monitoring
Designed for demanding industrial and IT environments, the RSUN DP33 Series offers 10kVA to 200kVA of reliable power with online double-conversion for continuous, clean AC output. It combines DSP-based control, real-time fault detection, and wide input tolerance to safeguard sensitive equipment from voltage sags, spikes, and transients.
Supporting RS232, SNMP, and GPRS interfaces, it enables remote management and diagnostics across various platforms. Its modular tower design simplifies installation and expansion in mission-critical deployments.
FEATURES:
SPECIFICATIONS:
| Model | 6KVA | 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA | 120KVA | 160KVA | 200KVA |
| INPUT | ||||||||||||
| Voltage | (208/308/400/480Vac) ± 20% / 5 wires (3 lines + neutral + ground) | |||||||||||
| Frequency | 50/60Hz ± 10% Auto sensing | |||||||||||
| Power factor | 0.8 | |||||||||||
| Filter | EMI, RFI | |||||||||||
| Dual input | optional | |||||||||||
| OUTPUT | ||||||||||||
| Voltage | (208/308/400/480Vac) ± 20% / 5 wires (3 lines + neutral + ground) | |||||||||||
| Frequency | 50/60Hz ± 1% Auto sensing | |||||||||||
| Power factor | 0.8 | |||||||||||
| Crest factor | 3:1 | |||||||||||
| Voltage T.H.D. | <2% with linear load | |||||||||||
| Efficiency | AC/AC>92% | |||||||||||
| Transfer time | 0 ms | |||||||||||
| Wave form | sine wave | |||||||||||
| Technology | true on-line double conversion controlled by microcontroller | |||||||||||
| Overload recovery | automatically transfer to UPS mode | |||||||||||
| Isolation transformer | inverter mode (bypass mode is optional) | |||||||||||
| Parallel connection | parallel connection function is ready (extra PCB is not reuired) | |||||||||||
| BATTERY | ||||||||||||
| Battery type | VRLA (valve regulated lead acid), not included | |||||||||||
| DC voltage | 384 Vdc | |||||||||||
| Charging time | 4 hours up to 90% | |||||||||||
| Battery detection | self-detect, transfer to battery mode adjustable | |||||||||||
| PROTECTION | ||||||||||||
| Lightning and transient protection | hot swappable lightning and transient surge suppressor (in:10Kamp, Up:1.5 Kv, I max: 20 Kamp.) | |||||||||||
| Harware protection | input breaker, output breaker, battery breaker, bypass breaker; DC fuse, fan, redundant power supply; temperature sensor, EPO (Emergency Power Off), audible alarms etc. | |||||||||||
| Software protection | discharging batteries, battery charger working mode, inverter working mode, emergency power off, manual shutdown, bypass SCR failure, bypass sequence failure, bypass over the limit, critical overload, batteries exhaustion, low or high output voltage, DC fuse open, 5V power supply failure, 13.5 power supply failure, inverter overvoltage, 200% overload on each line, transfer failure, inverter voltage out of range, over voltage betweenneutral and ground, UPS on bypass mode, bypass frequency out of range. | |||||||||||
| Bypass | solid state | |||||||||||
| Communication | RS232 intelligent slot, modem, SNMP(RJ45) (SNMP adaptive software is supplied by the producer) | |||||||||||
Advanced communication function:
Equipped with RS232, SNMP, and GPRS interfaces, the system allows remote monitoring, control, and diagnostics. An optional SNMP card supports TCP / IP, SNMP, and HTTP for full network integration. Ideal for distributed systems, this feature simplifies centralized UPS management and global system oversight.
APPLICATIONS: